Addressable System Design

New York Engineers offers the best and unparalleled addressable system designs for your fire alarms to save lives and property with precise identification and location of detectors.

shutterstock_1049493110

False Alarm Reduction

Our addressable fire alarm systems have the capability to reduce the possibility of false alarms in the event of a fire.

shutterstock_1049493110

Quick Response

Our addressable system designs offer a quick response in an emergency situation by pinpointing the exact device that triggered the alarm

shutterstock_1049493110

Reliable 

Our systems are designed to be reliable in an emergency situation. With fewer wires, there is less chances of wires malfunctioning as in conventional systems

Get In Touch

Addressable System Design

 
shutterstock_702742720

What is Addressable System Design?

Addressable system design is the opposite of a conventional system design (non-addressable system design), which consists of devices connected to the control panel by individual wires. Addressable panels, instead, have detector devices connected through a loop to the central control panel.

 

But, that’s not the only difference…

 

To start with, addressable systems mainly consist of fire, gas, smoke, and security breach detection devices. The great part of these devices is that a single device can have triple detection technologies: heat, gas, and smoke.

 

In an emergency situation, timely response and notification to the central monitoring system is critical. Conventional fire alarm systems, for instance, fail to identify the exact locations of devices in complex and large buildings such as university campuses, high-rise commercial premises, and hospitals. This is where New York Engineers comes in with unrivaled addressable system designs that detect problems instantly and notify the emergency personnel promptly so that necessary steps can be taken.

 

A second could mean a matter of life and death in an emergency situation. For instance, life could be lost or property could suffer extensive damages while conventional fire alarm systems are still struggling to spot a specific device that triggered the emergency in a complex building structure.

 

Conventional system designs are not generally bad, however; they can work well in small and medium buildings as they function well with zonings. Basically, they point to a specific zone where the problem could be. Imagine such a direction in a multi-level building; it could impede the response time.

fire alarm panel

What are the Advantages of Addressed System Design?

Addressable system design bears plenty of benefits for building owners compared to non-addressable system designs. The bullets below highlight the main benefits of this system:

  • Timely response to an emergency situation: There is no lag in this system. Such a prompt response is vital in an emergency situation of fire because every second counts
  • Precise identification of the device and location of the emergency: Emergency detectors are used in the system and are connected via a loop to the control panel. Each device has a unique “address” hence the name addressable system design. For this reason, it becomes effortlessly practical to pinpoint the exact location of the device and therefore take measurable steps particularly in large buildings
  • Diagnose accumulation of contaminants that could cause false alarms: fire detectors are often hit by false alarms. For example, simple dust could trigger the smoke alarm and this could be costly to the building. Addressable system designs detect the problem and notify the controllers on time before a false alarm is triggered
  • Less likelihood of wire breakage: There are only 2 wires compared to 4 wires in conventional fire alarm systems. Addressable systems provide you with the bus topology or loop design. Both are convenient and have fewer wires. It is therefore unlikely to struggle with wire breakages
  • Monitor performance and condition of each device independently: maintaining these systems is a cinch for New York Engineers. Each device can be monitored and maintained independently from others without bringing the entire system to a halt. Either side of the loop can still provide signals to the control panel if the other has been disconnected due to servicing another device
  • Ease of installation: because of less complicated wires, it becomes easy to install addressable system designs. However, not everyone can configure these systems because they have complex communication channels. You need a technologically savvy technician to program the entire system. Basically, there is a central control panel, a loop with emergency detectors and a central monitoring location. With the help of the built-in keypad and the display screen, a technician can configure the system efficiently
  • Reliability: This is perhaps the single most indispensable benefit of emergency systems. They have to be reliable. In a small or medium building, conventional systems are just fine, but the problem starts to emerge in large buildings. Addressable systems are reliable predominantly in large buildings mainly due to their ability to pinpoint an emergency location and identify a device in the network.

Get Pricing On a New MEP Design Proposal in Fewer than 24 Hours

Request a proposal →

Addressable and conventional system designs

 
shutterstock_410834191

What are the main differences between addressable and conventional system designs?

Quick Response

As highlighted already, addressable system designs respond faster than conventional system designs by pinpointing the exact location and identification of the device that triggered the alarm. Every homeowner would appreciate such a prompt and precise response so that the occupants could be redirected to certain evacuation exits.

 

Installation Cost Reduction

As your MEP partner of choice, we strive to save you costs. Although conventional alarm systems generally cost lesser than addressable panels, their installation costs can be exorbitant in that they require many wires. Again, a single wire failure could be catastrophic to the system.

 

An addressable design, on the other hand, reduces the costs of installation. The system might be expensive but the convenience, quick response and the programming ability justify its costs.

 

False Alarm Minimization

False alarms could be costly to the buildings. False activation of sprinkler systems in a water-sensitive room, for instance, can be destructive to your equipment thus letting you incur unnecessary costs. Such false alarms are notorious with conventional systems that get triggered easily by, for example, a dust build-up in a smoke detector device.

 

Addressable fire alarm system designs are configured to avoid false triggers. In a smoke detector, an addressable system may be programmed to monitor a build-up of soil to notify technicians so that necessary actions are taken. For these reasons, these systems are immune to false alarms.

 

Flexibility

Our addressable system design is flexible and easy to use. From the installation to the usage, it’s an absolute breeze to use this system. Only a qualified MEP engineer can be able to configure and program the system due to its complexities.

 

The other flexibility of the system is that each device can be programmed independently without affecting the entire system. You can disconnect the other side of the loop from the control panel when addressing the other device but the panel will still receive signals from the remaining side of the loop.

 

Using the integrated pad and the display screen, an addressable fire alarm system is easily configured. Even when installing the software, you can use the USB interface to achieve that off-site.    

 

Reliability

 

An addressable system design, unlike a conventional system design, connects all devices through a loop that attaches at two points to the control panel. And so, if one side of the loop fails, the other side will continue functioning. This makes the system very reliable.

 

With only two wires connecting the devices, it’s highly unlikely for our addressable fire alarm system to fail. Besides, the control panel always notifies our technicians if there’s any problem so we can act as early as possible.

 

Conventional systems’ reliability is only limited to small and medium buildings. In large buildings reliability is a main concern and as thus it jeopardizes the lives of many occupants and the exorbitantly expensive high-rise structure.

shutterstock_226359109

Can I upgrade my current conventional system to addressable system design?

Yes, you can seamlessly convert from your current conventional system design to the more modern addressable system. Conventional systems have been present since the age of technology and are increasingly being replaced by modern addressable counterparts. So, changing your conventional system configurations is a huge benefit for your buildings.

 

New York Engineers are the best in the design, installation, maintenance, and monitoring of addressable fire alarm system designs. Our technicians know how to seamlessly convert from one system to the other.

 

Before you can convert, the current system must be assessed and analyzed per its configurations. For instance, one has to know how many detectors were connected; where they are located; how are the wiring configurations; and many more questions.

 

The current wiring configuration may be used in the new design if it is compatible with replacement detectors that are programmable in line with the new system.

 

Also noteworthy will be the age of the existing power requirements to check if they can withstand new system requirements or there need to be some amendments or complete replacements.

 

Note that the fire department has to review the new fire alarm system to check if it meets the stipulated requirements in Chicago. With the experienced, competent and certified MEP Engineers in New York, there should not be a problem at all.

 

The parts below give a glimpse of how a conventional system design is converted into an addressable design.

  • Part 1: A design of the addressable fire alarm and application of the permit
  • Part 2: Current control panel replacement and testing of the incoming addressable system
  • Part 3: Acquiring new detectors devices if current ones have worn out
  • Part 4: Pretest the new design before notifying the fire department of the new changes

 

This may seem too technical but if you entrust such expertise to a New York Engineers technician then everything shall run smoothly. There is no need to worry about the phases needed to get rid of your non-reliable conventional system in your building.

shutterstock_718511191

Upgrading the current addressable system design

Is your building changing in terms of size or function? You can consider upgrading the fire alarm system. The great part about this system is that it is easy to reconfigure. Additional devices can be added seamlessly and effortlessly.

 

A certified electrical engineer can maneuver your addressable control panel to upgrade it in line with the number of additional devices required for a new building. The addressable design can be reconfigured through Windows software on your PC.

 

If you are not changing the size of your building or adding new detectors in any building, you only have to maintain the current addressable system. New York Engineers can also serve as your go-to MEP partner to accomplish that for you.

 

The good part about addressable systems is that each device is independent of others in the system. This means you can monitor and maintain any device without affecting the performance of others. In actual sense, you can exchange signals between a particular device and the control panel to see if it’s working.

 

Maintenance should be done regularly to ensure that the system is always up to date. Either way, the control panel will notify the controllers if there’s any problem to be addressed within the system.

Looking for an MEP / Fire Protection Engineering Poject?

Contact Us →

Addressable System Design and diy

 
shutterstock_226359109

Is Addressable System Design Easy Through DIY?

Due to the complexities of this system’s programming requirements, DIY may be an overwhelming task for a non-tech savvy person. Installing the design is, of course, an absolute breeze but configuring it is the main problem. Programming is a major component of addressable fire alarm system designs.

 

Failure to program and install the system properly may lead to malfunctioning which can be risky to an emergency situation. New York Engineers technicians are well-rounded to make the installation and configuration seamless at low costs. This ensures that the system runs optimally during emergency situations. Typically, the technician will run testing phases to ensure that the system is efficient.

 

Besides, fire safety regulations stipulate the need to have a certified fire technician to install fire alarm systems. They will have to sign off that indeed the system installed is safe and installed according to the regulations.

shutterstock_1075892759

Should I immediately get rid of conventional system designs?

Having gone through the benefits of an addressable system design above, what’s your ultimate decision? If you have a small building it is still okay to have conventional fire alarm systems because it will be easy to find the zoning locations in case of fire emergency. But, you can still consider addressable system designs for small buildings due to the convenience, reliability, inexpensive installation costs and false fire alarm reductions.

 

Addressable fire alarm systems are a definite choice in complex buildings due to their ability to pinpoint exact detector devices and locate them on either floor. They are the most reliable.

 

Get your addressable system design done by New York Engineers today. Whether you have a new building or you want to upgrade from conventional to addressable, our technicians are always within reach.

shutterstock_171033323

Why Choose New York Engineers MEP Designs?

As experts in fire protection engineering services, our fire alarm system designs are unmatched in quality and performance in the industry. We design the best Addressable System Designs revered by many clients. And all our designs are in accordance with the relevant NFPA standards.

 

Choosing New York Engineers as your MEP partner is a great choice to ensure that your designs are never compromised. We save you costs while offering uncompromised quality in Addressable System Designs.

Agencies Approvals We Secure

Have a Mechanical Engineering Project? Talk To Us.

 

"Thank you Jahnavi and team for all of your dedication and hard work on this important project for HANAC and the Corona Community."

John-Napolitano_48x48 John Napolitano, Director of Capital Projects, HANAC

"Things went well, and I want to restate how much I appreciate the Herculean effort your team provided to finish up by today!"

Murray-Levi_48x48 Murray Levi, Principal, MTA Artchitects

"The way we work together, the way they overcome challenges, and the way they deliver impresses me more than other engineers, and I'm one of them!"

Silviu-Herscher_48x48 Silviu Herscher, Director of Capital Infrastructure, The New School