Low Pressure Steam System Design

shutterstock_1049493110

Accuracy

With our design software, we can make the most accurate MEP models for your machines. We ensure that they’ll have all the precise measurements and functions necessary.

shutterstock_1049493110

Energy Efficiency

We will make sure that your machine will not eat up too much power to run by making it as energy-efficient as possible. That way, you can also save costs in the long run.

shutterstock_1049493110

Longevity

With a good design, you won’t have to worry about your machine breaking down often nor will you have to worry about repairs too much. We got this covered.

Get In Touch

Low Pressure Steam System

 

Pipes to be shown in plumbing riser diagram

 

Do you use a low pressure steam boiler system for your home or your establishment? If you do, then you’ll probably know about the energy costs that you’ll have to operate the machine plus maintenance. You’ll also have to worry about those times when the machine bucks down and call for repairs.

 

We understand how much of a hassle these aspects are which is why we at New York Engineers have the solution to your woes. With our mechanical, electrical, and plumbing design services, we can create a realistic model of the actual machine. At the conceptualization stage, we can already make your machine flawless so that the end product will also be perfect. Whether you live in or outside of Chicago, you can surely put your trust in our MEP design expertise.

 

New York Engineer’s Low Pressure Steam System Design

 

One of the things that make us stand out would be our strict, streamlined process. This allows us to further maximize our productivity and meet deadlines right on the dot. Just to give you an idea, here is how we do things:

  • We Listen

This is the core of how we provide the best MEP design services-- we listen. For us to give you the best design possible, we must first know how you want the MEP design to be customized. With that, we will get all your ideas in a brainstorming session then bring them to life.

  • We Gather Data

To make this design as realistic as possible, we first make sure that we get all the necessary measurements from the area first. We will be sending over principals to inspect the area and get all the necessary data for the design.

  • We Get to Work

As soon as the principals finish the inspection, they will immediately give all the necessary data to the engineers and designers of our team. From there, the engineers will begin work on the design. They will also create a timetable so that they can set deadlines accordingly.

  • We Document

Along with creating the MEP design, we will also document all data of the design that we have made. This includes the specific measurements, the performance analysis, schematics, and more. All will be stored in a database that can easily be accessed for the construction.

  • We Present

When we are done with the design, we will present it to you for your approval. Should you have any revisions needed, we will discuss those with you and get down to them promptly.

 

As you can see, we are very systematic with our approach to our MEP designs. We believe that a systematic, step-by-step approach such as this will allow us to create your low pressure steam system design flawlessly.

Combined with our systematic approach, we also have a team of expert engineers who have impeccable qualifications when it comes to engineering project designs. These two aspects have allowed our company to cement its reputation as one of the best MEP design firms.

With a high-quality design from our company, you now can avoid having to do manual troubleshooting if ever your machine doesn’t work the way it is supposed to. Having a good design allows you to avoid errors and system flaws for your steam system. You will also not need to do too many repair jobs since we have created the design to be very durable. With that, you can say goodbye to high maintenance machinery and complicated hiccups along the way.

As your partner in building your low pressure steam boiler system, we will ensure that you will get the machine that you’ve always visualized. It all starts with the design.

Get Pricing On a New MEP Design Proposal in Fewer than 24 Hours

Request a proposal →

Why Design Your Low Pressure Steam System

 

SS_Pipes in a boiler room. Insulation of pipes.

 

Design is the main foundation of every project. If ever the design is flawed, then your machine will also surely be flawed. With a flawed design, you will be spending thousands of dollars on recalibration, repairs, and maintenance.

If you choose to use an MEP design, you will be able to enjoy the following benefits:

  • Flawless performance
  • High cost savings
  • Long lasting machinery
  • Precise figures and measurements for documentation
  • Customized features

 

Our special toolkit can give you all of those benefits when you partner with us in creating an MEP design. As long as the backbone is well built, then you can be sure that all the other parts will remain in tiptop shape.

 

Breaking Down Low Pressure Steam Systems

 

When we created designs for low pressure steam systems, we are extremely meticulous with detail because these machines are rather sensitive and need to be built with intense precision so that it will last longer and work in the most efficient manner.

 

In order to create an efficient steam system, we have to make sure that the machine efficiently distributes steam through the pipes. When a low pressure steam system operates, it would heat up water from the boiler, producing steam. The steam then gets pushed through the piping and through a radiator to provide heat to homes or establishments.

 

So as you can see, there is a certain flow that has to be followed when we design our low pressure steam systems. For the flow to remain smooth, we need to make sure that all parts are in good working condition and are all in sync with each other.

 

What We Do When We Design Low Pressure Steam Systems

 

The design of these steam systems can be a little bit complicated, but we can break it down, so it’s simpler to understand. Basically, we take a few things into consideration when we create our MEP designs:

  • Pressure Design

We always consider the pressure design first before we create our designs. We know for a fact that low pressure steam systems are only limited to 15 PSI. Of course, we also make sure that we customize this based on what our customers need and want. But as a general rule, we keep to 15 PSIG design and nothing higher.

  • Heating Load

One of the biggest factors that we take into consideration would be the heating load or the size of the machine. When we brainstorm with our clients, we also take into consideration the weather conditions so that we know how much heating load to add. We prefer to be a little flexible with our low pressure steam systems’ design so that the features can match and adapt to the situation of the client.

  • Heating Capacity

Just like the PSIG design, the heat must also be limited to a minimum in order for the steam to move through the pipes smoothly. As designers, we need to ensure that the machine keeps to only a temperature of below 250 degrees Fahrenheit; otherwise, the machine will border toward the high pressure steam system type and may not take the load.

  • Local Emission Regulations

We understand that there are certain regulations that need to be observed when designing heavy machinery such as this. That said, the regulations may differ per state. For instance, machine regulations in Chicago may be different from that in other states. With that, New York Engineers will always discuss local machinery regulations with our clients before tackling the design so that we follow the policies of each state.

  • Piping System

Lastly, we will consider the piping system that can be installed in the area of our client. When we create our design, we need to make sure that the machine fits right into the area which is why we send principals to do thorough inspection first. We can take a look at the existing piping system or the area where can install extra pipings.

 

While we are pretty specific when it comes to what we consider in building your low pressure steam system MEP design, we are also rather flexible with regard to customizations so that we can tailor-fit the final design to what you need.

Looking for an MEP / Fire Protection Engineering Poject?

Contact Us →

Why Choose New York Engineers?

 

Engineers working on a building site holding a blueprints

 

If you choose New York Engineers as your partner, we will offer you a plethora of advantages with our MEP designs. Here are a few benefits that you get to enjoy when we design your low pressure steam boiler system:

  • Customized Design

As you can see, we really take customization seriously. We know that the heating load, piping systems, and heat capacity of your low pressure steam boiling system all need to follow certain conditions based on your area as well as your exact requirements. That’s why we make sure that our MEP designs are versatile enough to fit the situation you’re in.

  • Realistic 3D Representation

We strive to create the most realistic models for our clients so that they can immediately see what the end product will be like before it is even created. By knowing what the end product is like beforehand, you can already make more planned decisions with its usage. When it will be built and running, you won’t need to recalibrate it further since you’ve already made the plans during the design stage.

  • Fast Processing

Because we follow a very strict process, we are known for our blazing fast turnaround time. We follow a no delay policy wherein if we set a deadline, we follow it to the dot unless an unforeseen circumstance appears. But other than that, all our existing clients have been satisfied with our quick work submissions.

  • Reasonable Budget

Another aspect that we like to cover would be budget. If we can save money for you, we will in the best possible way. For building your low pressure steam system, we will make your machine more energy efficient so that you can save money. We will also create a reasonable budget for the entire construction of the machine.

  • Reasonable Rates

Aside from helping you budget, we’ll also provide you with rates that won’t break the bank. We understand that budget constraints always crop up, and in the view of helping clients get the best quality outputs affordably, we do cost-cutting measures internally to offer better deals to our valued customers.

  • Overall Quality

Because of our software, our experts, and our passion to serve, you can expect no less than good service when dealing with us. We even have a ZERO change guarantee that we are extremely proud of. This ZERO encompasses our full confidence in our ability to provide you with a great design. That said, we have an 80% first-time approval rate for projects-- we hardly need to revise our finished products.

 

The Best Partner for Your MEP Design Projects

With New York Engineers, you won’t have to worry about flawed designs with your low-pressure steam systems. Once we get to work on your design, you can enjoy a seamless performance from your machine. Aside from just low-pressure steam boiler systems, we also do designs for other mechanical, engineering, and plumbing systems or machines. As long as you become our partner, you can be certain that we’re here for you in the long run.

To request for a customized design, just contact us and we’ll send over a proposal for you to look over. You can also check out our other services from our Service page.

Agencies Approvals We Secure

Have an MEP Engineering Project? Talk To Us.

 

"Thank you Jahnavi and team for all of your dedication and hard work on this important project for HANAC and the Corona Community."

John-Napolitano_48x48 John Napolitano, Director of Capital Projects, HANAC

"Things went well, and I want to restate how much I appreciate the Herculean effort your team provided to finish up by today!"

Murray-Levi_48x48 Murray Levi, Principal, MTA Artchitects

"The way we work together, the way they overcome challenges, and the way they deliver impresses me more than other engineers, and I'm one of them!"

Silviu-Herscher_48x48 Silviu Herscher, Director of Capital Infrastructure, The New School