Structured cable design is the full infrastructure of all the cables and the associated hardware. This design provides a complete solution to a project’s telecommunications network needs. Nearby EngineersNew York Engineers will provide you with the best structured cabling design that can take care of all your project requirements based on varying standards. Our team of engineers has more than decades of experience combined in the field of structured cabling. Our engineers will design, install and maintain your cabling system quickly to meet and exceed all project deadlines.
We are one of the fastest growing MEP design firms in the construction industry. We pride ourselves on having a fast turnaround while providing cost effective solutions. We are licensed in 50 states and are your one stop shop for all MEP design needs.
We are licensed in all 50 states!
We design to the perfection
Enjoy our lightening fast turnaround
We have completed so far!
Our designs are approved by DOB in one go
The best service experience in the market
Structured cable design is the full infrastructure of all the cables and the associated hardware. This design provides a complete solution to a project’s telecommunications network needs. Such an infrastructural design serves to be useful for a variety of purposes. These include but are not limited to transmitting data via a computer network or using a telephone service. The entire network shouldn’t depend upon the devices that are present within the network.
Get structured cable design from NYE to meet the performance requirements for data and voice in the new heterogeneous communication environments.
Each structured cabling design is different. The variations are due to:
The techniques used for the completion and maintenance of cabling installations are pretty much standard. This standardization of all the installations is of extreme importance due to the fact that exceedingly complex arrangements are capable of meeting the acceptable performance of the system.
The cabling industry of the United States follows the ANSI or American National Standards Institute. It also follows the rules set by TIA/EIA, for being responsible to provide and maintain standard practices in this profession. Therefore, the industry has published different standards for designing, installing, and maintaining cabling systems and designs. The primary objectives of these standards are to ensure an adequate cabling installation.
Nearby EngineersNew York Engineers will provide you with the best structured cabling design that can take care of all your project requirements based on varying standards. We are certified service providers for low voltage specialty systems and networks in Chicago.
Our team of engineers has more than decades of experience combined in the field of structured cabling. Our engineers will design, install and maintain your cabling system quickly to meet and exceed all project deadlines. Our engineers can install from one cable to thousands within any environment and both outside and inside your site to meet all your cabling requirements.
Our team of experienced and certified technicians will ensure that all your installations are made while complying with all electrical regulation codes and standards as well as the rules set by TIA/ EIA. You can contact us today for hiring the best service in town.
Structured cabling standards are followed across the States and they are published by TIA (Telecommunications Industry Association), ISO/IEC and CENELEC. In the US, TIA issues ANSI/TIA-568 standards for cabling and telecommunications within commercial premises and it is very similar to the ISO and CENELEC documents.
Some of the standards Chicago regulators require are listed as follows :
Structured cabling designs typically include facilities for entrance; pathways for horizontal and vertical backbone design; cables for horizontal and vertical backbone design; horizontal cables; horizontal pathways; outlets for work area; telecommunications closets; equipment rooms; faculties for cross-connection; MUTOA or (multi-user telecommunications outlet assemblies); consolidation points; and transition points.
The facility for entrance includes all the components required for cabling purposes. It serves to be the source of connection with the external service facilities with the in-premises cabling system. The entrance for the facility may include cables, pathways for service entrance, circuit protection devices, connecting as well as transition hardware.
This facility can house the transition outside site cabling for cabling approved for the purpose of intra-building construction. It normally includes transition for fire-grade cables. This facility also serves as network demarcation between the customer premises and the service provider as per the requirements. Currently, regional as well as national electric codes guide the placement of various electrical protection devices.
The position of this facility for entrance relies on the kind of facility as well as the route of external site cabling which can either be aerial or burial. It also depends upon the building’s architectural design, and its aesthetic considerations. The 4 principal kinds of faculties for entrance include a tunnel, underground, aerial and buried.
A thorough cabling design needs to be well-structured and it must help in improving performance and eradicating downtime. In most cases, cabling is a mere ten percent of the overall cost of the entire communication system and it also comes with a long life. Nevertheless, there is a misconception that network cabling is very much similar to electrical cabling where you just need to hook all the components up and they will start working. In reality network cable is a lot more sensitive than an electrical cable and it needs to be professionally installed if you want it to make a huge difference when it comes to downtime in critical conditions.
Our experienced professionals will provide you with a highly reliable as well as an extremely cost-effective solution for any communication system on a turnkey basis. They will take care of design, installation, and maintenance. Whether you are going for a new installation or want to upgrade your current one we are here to serve you. Whether you are expanding, moving, or having trouble with your current network our team of professional engineers will take care of it in no time.
Cabling network is where all the data travels among various components of the network for improved communication. These components and equipment may include scanners, printers, wireless, computers, video signal, TV, and projectors. A good and neat professional cable installation service is what NY Engineering Inc provides to its customers.
New York Engineers is right on top of all these rapidly-changing technologies that are taking place in the modern era. We will provide you with the best presentation and collaboration solution that your project requires. These days, new uses of audio-visual technologies appear on a daily basis.
In different sites presentation rooms and classes, overhead projections, as well as wall-mounted displays, interactive panels, and sound whiteboards, have almost become a norm. In medical rooms and hospitals, they integrate entertainment and dispense information. Moreover, in business, different visual-audio tools have become essential in various interdepartmental and cross-departmental collaborations and presentations.
New York Engineers visual-audio technical professionals can provide your site with designing, installation and maintenance services with a host of turnkey solutions that range from your standard overhead projection, wall-mounted displays along with sound systems to a variety of distribution systems that will deliver audio and video across your facility.
With the passage of time our world is adopting new technologies and due to this advancement different corporate entities are in search of new, improved and better telecommunication solutions. These solutions need to be very easy to maintain and must also be very cost effective. This is where an efficient structured cabling design comes in to play. These services lay the foundation for successful and highly productive business communication. From video surveillance to the telephone network, these structured cabling design services can effectively manage all their business requirements effortlessly.
NY Engineering Inc is proud to present its expertise in all these areas. We have a team of highly trained professionals who can not only design, install, and maintain your structured cabling design but can also replace the existing ones to improve the overall efficiency of your business communication.
Here are some of the significant advantages of shifting from your traditional infrastructure for communication to the modern age-structured cabling design services. If you haven’t thought of getting rid of your conventional point-to-point then this list of merits will help you make your decision.
If you have installed structured cabling design then you are in for getting higher returns on investment. The reason behind that is these entire services combine the IT network for voice, video, and data.
It lowers the overall cost maintenance and operation for your business.
With structured cabling design, your IT network and infrastructure is well prepared for any expansions n the future. Structured cabling design allows you to conveniently add any future technologies within the existing system.
Conventional networks and infrastructures are nothing more than a headache with all these clusters of wires. Structured cabling consolidates these clusters in a unified form and can easily transmit data in multiple formats. Of course with consolidated clusters, you can easily manage your network for maintenance and repairs as well. The entire area looks more aesthetically neat as well.
Structured cabling design is far simpler to manage particularly if you compare it with conventional communication infrastructure. The fact of the matter is that there is no need to employing a large team for managing the cabling data center. Structured cabling design enables you to do it with minimal staff and in a more manageable way.
In terms of aesthetic value, structured cabling design is a lot more attractive and neat if you compare it with the multiple wiring of conventional systems.